Den här sidan förklarar hur du skapar och hanterar tjänstekonton med hjälp av
Identity and Access Management (IAM) API, Google Cloud-konsolen och
gcloud kommando-
linjeverktyg

Som standard kan varje projekt ha upp till 100 tjänstekonton som styr åtkomsten till dina resurser. Du kan begära en kvothöjning vid behov. Läs mer om kvoter och begränsningar

## Innan du börjar
Aktivera IAM API

Förstå IAM-tjänstkonton
Installera Google Cloud CLI
 Nödvändiga roller
För att få de behörigheter som du behöver för att hantera tjänstekonton, be din administratör att ge dig följande IAM-roller i projektet:
-
Så här visar du tjänstkonton och tjänstkontometadata:
Visa tjänstekonton (
roles/iam.serviceAccountViewer)
-
Så här visar och skapar du tjänstekonton:
Skapa tjänstekonton (
roles/iam.serviceAccountCreator)
-
Så här visar och raderar du tjänstkonton:
Ta bort tjänstekonton (
roles/iam.serviceAccountDeleter)
-
För att fullständigt hantera (visa, skapa, uppdatera, inaktivera, aktivera, ta bort, återställa och hantera åtkomst till) tjänstkonton:
Service Account Admin (
roles/iam.serviceAccountAdmin)
Mer information om att bevilja roller finns i Hantera åtkomst

Om du vill veta mer om dessa roller, se Roller för tjänstekonton

IAMs grundläggande roller innehåller också behörigheter att hantera tjänstekonton. Du ska inte bevilja grundläggande roller i en produktionsmiljö, men du kan bevilja dem i en utvecklings- eller testmiljö

## Skapa ett tjänstekonto
När du skapar ett tjänstkonto måste du ange ett alfanumeriskt ID
(
i exemplen nedan), såsom
`SA_NAME`
mitt-tjänst-konto. ID:t måste vara mellan 6 och 30 tecken och kan
innehåller små alfanumeriska tecken och bindestreck. När du har skapat en tjänst
konto kan du inte ändra dess namn

Tjänstkontots namn visas i e-postadressen som tillhandahålls
under skapandet, i formatet


`SA_NAME`@ `PROJECT_ID`.iam.gserviceaccount.com
Varje tjänstkonto har också ett permanent, unikt numeriskt ID, som genereras automatiskt

Du tillhandahåller även följande information när du skapar ett tjänstekonto:
är en valfri beskrivning för tjänstekontot

SA_DESCRIPTION
är ett vänligt namn för tjänstekontot

SA_DISPLAY_NAME
är ID:t för ditt Google Cloud-projekt

PROJECT_ID
När du har skapat ett tjänstkonto kan du behöva vänta i 60 sekunder eller mer innan du använder tjänstekontot. Det här beteendet uppstår eftersom läsoperationerna så småningom är konsekventa; det kan ta tid innan det nya tjänstekontot blir synligt. Om du försöker läsa eller använda ett tjänstkonto direkt efter att du har skapat det, och du får ett felmeddelande, kan du försöka med begäran igen med exponentiell backoff

 Trösta
Gå till Google Cloud-konsolen
Skapa tjänstekontosida

Gå till Skapa servicekonto
Välj ett molnprojekt

Ange ett tjänstkontonamn som ska visas i Google Cloud-konsolen

Google Cloud-konsolen genererar ett tjänstkonto-ID baserat på detta namn. Redigera ID vid behov. Du kan inte ändra ID senare

Valfritt: Ange en beskrivning av tjänstkontot

Om du inte vill ställa in åtkomstkontroller nu, klicka
Klart för att slutföra skapandet av tjänstkontot

Klicka på för att ställa in åtkomstkontroller nu
Skapa och fortsätt och fortsätt till nästa steg

Valfritt: Välj en eller flera IAM-roller att tilldela tjänstkontot i projektet

När du är klar med att lägga till roller klickar du
Fortsätta

Valfritt: I
Tjänstkontoanvändare rollfält, lägg till medlemmar som kan imitera tjänstekontot

Valfritt: I
Rollfält för tjänstkontoadministratörer, lägg till medlemmar som kan hantera tjänstekontot

Klick
Klart för att slutföra skapandet av tjänstkontot

 gcloud CLI
För att skapa tjänstekontot, kör
gcloud iam service-accounts createcommand:
gcloud iam service-konton skapas
SA_NAME\ --description="DESCRIPTION"\ --display-name="DISPLAY_NAME"Byt ut följande värden:
: namnet på tjänstekontot
SA_NAME
: en valfri beskrivning av tjänstkontot
BESKRIVNING
: ett tjänstkontonamn som ska visas i Google Cloud-konsolen
DISPLAY_NAME
-
Valfritt: För att ge ditt tjänstekonto en IAM-roll i ditt projekt, kör
gcloud projekterar add-iam-policy-bindingcommand:
gcloud-projekt add-iam-policy-bindande
PROJECT_ID\ --member="serviceAccount: SA_NAME@ PROJECT_ID.iam.gserviceaccount.com"\ --role="ROLE_NAME"Byt ut följande värden:
: projektets ID
PROJECT_ID
: namnet på tjänstekontot
SA_NAME
: ett rollnamn, t.ex
ROLLNAMN
roles/compute.osLogin
-
Valfritt: För att tillåta användare att utge sig för tjänstekontot, kör
gcloud iam service-accounts add-iam-policy-bindingcommand för att ge en användare tjänstekontot Användarrollen (
roles/iam.serviceAccountUser) på tjänstkontot:
gcloud iam service-accounts add-iam-policy-binding SA_NAME@ PROJECT_ID.iam.gserviceaccount.com \ --member="användare: USER_EMAIL"\ --role="roles/iam.serviceAccountUser"Byt ut följande värden:
: projektets ID
PROJECT_ID
: namnet på tjänstekontot
SA_NAME
: e-postadressen för användaren
USER_EMAIL
-
 RESTEN
De
serviceAccounts.create
metoden skapar ett tjänstekonto

Innan du använder någon av förfrågningsdata, gör följande ersättningar:
: Ditt Google Cloud-projekt-ID. Projekt-ID:n är alfanumeriska strängar, t.ex
PROJECT_ID
mitt projekt
: Det alfanumeriska ID:t för ditt tjänstkonto. Detta namn måste vara mellan 6 och 30 tecken och kan innehålla gemener, alfanumeriska tecken och bindestreck

SA_NAME
: Valfritt. En beskrivning för tjänstekontot

SA_DESCRIPTION
: Ett mänskligt läsbart namn för tjänstkontot

SA_DISPLAY_NAME
HTTP-metod och URL:
POST httpsiam.googleapis.com/v1/projects/
PROJECT_ID/servicekonton
Begäran JSON-kropp:
{ "konto-id": "SA_NAME", "serviceAccount": { "description": "SA_DESCRIPTION", "displayName": "SA_DISPLAY_NAME"} }
För att skicka din förfrågan, expandera ett av dessa alternativ:
 curl (Linux, macOS eller Cloud Shell)
Spara förfrågningstexten i en fil som heter
request.json,
och kör följande kommando:
curl -X POST -H "Authorization: Bearer $(gcloud auth print-access-token)"-H "Content-Type: application/json; charset=utf-8"-d @request.json "httpsiam.googleapis.com /v1/projekt/
PROJECT_ID/serviceAccounts"PowerShell (Windows)
Spara förfrågningstexten i en fil som heter
request.json,
och kör följande kommando:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization"= "Bärare $cred"}
Invoke-WebRequest `
-Metod POST `
-Headers $headers `
-ContentType: "application/json; charset=utf-8"`
-InFile request.json `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts"| Välj-Objekt -Utöka innehåll
 API Explorer (webbläsare)
Kopiera förfrågningstexten och öppna
metodreferenssida

API Explorer-panelen öppnas till höger på sidan

Du kan interagera med det här verktyget för att skicka förfrågningar

Klistra in förfrågningstexten i det här verktyget, fyll i andra obligatoriska fält och klicka
**Kör**

Du bör få ett JSON-svar som liknar följande:
{ "name": "projects/my-project/serviceAccounts/[email protected]", "projectId": "mitt-projekt", "uniqueId": "123456789012345678901", "email": "[email protected]", "displayName": "Mitt tjänstkonto", "etag": "BwUp3rVlzes "description": "Ett servicekonto för att köra jobb i min project", "oauth2ClientId": "987654321098765432109"}
 C++
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. Mer information finns i referensdokumentationen för IAM C++ API
namnutrymme iam = ::google::moln::iam; std::string const&  project_id, std::string const&  konto-id, std::strängkonst&  display_name, std::string const&  beskrivning) { iam::IAMClient client(iam::MakeIAMConnection google::iam::admin::v1::ServiceAccount service_account; service_account.set_display_name(display_name); service_account.set_description(description); auto response = client.CreateServiceAccount("projects/"+ project_id, account_id, service_account); if (!response) throw std::runtime_error(response.statusmessage std::cout<<  "ServiceAccount har skapats: "<<  svar->DebugString()<< ""; }
 C#
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. För mer information, se referensdokumentationen för IAM C# API

använder System; använder Google.Apis.Auth.OAuth2; använder Google.Apis.Iam.v1; använder Google.Apis.Iam.v1.Data; public partial class ServiceAccounts { public static ServiceAccount CreateServiceAccount(string projectId, string name, string displayName) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credentialvar request = new CreateServiceAccountRequest { AccountId = name, ServiceAccount = new ServiceAccount { DisplayName = displayName } }; var serviceAccount = service.Projects.ServiceAccounts.Create( request, "projects/ "+ projectId).Execute Console.WriteLine("Skapat tjänstkonto: "+ serviceAccount.Email); returnera serviceAccount; } }
 Gå
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. Mer information finns i referensdokumentationen för IAM Go API

import ( "context""fmt""io"iam "google.golang.org/api/iam/v1") // createServiceAccount skapar ett tjänstkonto. func createServiceAccount(w io.Writer, projectID, name, displayName string) (*iam.ServiceAccount, error) { ctx := context.Background() service, err := iam.NewService(ctx) if err != noll { return nil, fmt.Errorf("iam.NewService: %v", err) } request := &iam.CreateServiceAccountRequest { AccountId: name, ServiceAccount: &iam.ServiceAccount{ DisplayName: displayName, }, } account, err := service.Projects.ServiceAccounts.Create("projectsprojectID, request).Do() if err != nil { return nil, fmt.Errorf("Projects.ServiceAccounts.Create: %v", err) } fmt.Fprintf(w, "Skapat tjänstkonto: %v", konto) returkonto, noll }
 Java
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. Mer information finns i referensdokumentationen för IAM Java API

importera com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; importera com.google.api.client.json.jackson2.JacksonFactory; importera com.google.api.services.iam.v1.Iam; importera com.google.api.services.iam.v1.IamScopes; importera com.google.api.services.iam.v1.model.CreateServiceAccountRequest; importera com.google.api.services.iam.v1.model.ServiceAccount; importera com.google.auth.http.HttpCredentialsAdapter; importera com.google.auth.oauth2.Google Credentials; importera java.io.IOException; importera java.security.GeneralSecurityException; importera java.util.Collections; public class CreateServiceAccount {// Skapar ett tjänstekonto. public static void createServiceAccount(String projectId, String serviceAccountName) { // String projectId = "mitt-projekt-id"; // String serviceAccountName = "my-service-account-name"; Iam-tjänst = null; prova { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Det går inte att initiera tjänsten:
"+ e.toString return; } prova { ServiceAccount serviceAccount = new ServiceAccount serviceAccount.setDisplayName("ditt-visningsnamn CreateServiceAccountRequest request = new CreateServiceAccountRequest request.setAccountId(serviceAccountName); request.setServiceAccount(serviceAccount); serviceAccount = service.projectsserviceAccountscreate( "projects/"+ projectId, request).execute System.out.println("Skapat tjänstkonto: "+ serviceAccount.getEmail } catch (IOException e) { System.out.println("Det går inte att skapa tjänstekonto:
"+ e.toString } } privat statisk Iam initService() kastar GeneralSecurityException, IOException {// Använd strategin Application Default Credentials för autentisering. För mer information, se: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initiera IAM-tjänsten, som kan användas för att skicka förfrågningar till IAM API. Iam-tjänsten = new Iam.Builder.JacksonHTTransport.JacksonHTTTransport.JacksonnewTransport. getDefaultInstance ny HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build returtjänst; } }
 Pytonorm
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. Mer information finns i referensdokumentationen för IAM Python API

importera OS från google.oauth2 import service_account import googleapiclient.discovery def create_service_account(project_id, name, display_name): Skapar ett tjänstekonto referenser = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_ENTwwwLICATION_CREDis.https/www molnplattformstjänst = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) my_service_account = service.projectsserviceAccountscreate( name='projects/'+ project_id, body={ 'accountId': name, 'serviceAccount': { 'displayName': display_name } execute() print('Skapat tjänstkonto: '+ my_service_account['email return my_service_account
När du har skapat ett tjänstkonto tilldelar du tjänstkontot en eller flera roller så att det kan agera å dina vägnar

Om tjänstekontot behöver komma åt resurser i andra projekt måste du vanligtvis aktivera API:erna för de resurserna i projektet där du skapade tjänstekontot

## Listar tjänstkonton
Du kan lista dina tjänstekonton för att hjälpa dig granska tjänstekonton och nycklar, eller som en del av ett anpassat verktyg för att hantera tjänstekonton

 Trösta
Gå till Google Cloud-konsolen
Servicekontosidan

Välj ett projekt

De
Service accountspage listar alla användarhanterade tjänstkonton i det projekt du valde. Sidan visar inte Google-hanterade tjänstkonton

 gcloud CLI
Utför
gcloud iam tjänst-konton lista
kommando för att lista alla tjänstkonton i ett projekt

Kommando:
gcloud iam tjänst-konton lista
Utdata är listan över alla tjänstekonton i projektet:
NAMN E-POST
SA_DISPLAY_NAME_1 SA_NAME_1@ PROJECT_ID.iam.gserviceaccount.com SA_DISPLAY_NAME_2 SA_NAME_2@ PROJECT_ID.iam.gserviceaccount.com
 RESTEN
De
serviceAccounts.list
metod listar alla tjänstekonton i ditt projekt

Innan du använder någon av förfrågningsdata, gör följande ersättningar:
: Ditt Google Cloud-projekt-ID. Projekt-ID:n är alfanumeriska strängar, t.ex
PROJECT_ID
mitt projekt

HTTP-metod och URL:
HÄMTA httpsiam.googleapis.com/v1/projects/
PROJECT_ID/servicekonton
För att skicka din förfrågan, expandera ett av dessa alternativ:
 curl (Linux, macOS eller Cloud Shell)
Kör följande kommando:
curl -X GET -H "Authorization: Bearer $(gcloud auth print-access-token)""httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts"PowerShell (Windows)
Kör följande kommando:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization"= "Bärare $cred"}
Invoke-WebRequest `
-Metod GET `
-Headers $headers `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts"| Välj-Objekt -Utöka innehåll
 API Explorer (webbläsare)
Öppna
metodreferenssida

API Explorer-panelen öppnas till höger på sidan

Du kan interagera med det här verktyget för att skicka förfrågningar

Fyll i alla obligatoriska fält och klicka
**Kör**

Du bör få ett JSON-svar som liknar följande:
{ "accounts": [ { "name": "projects/my-project/serviceAccounts/[email protected]", "projectId": "mitt-projekt", "uniqueId": "123456789012345678901", "email": "[email protected]", "description": "Mitt första tjänstekonto", "displayName": "Tjänstkonto 1", "etag": "BwUpTsLVUkQ "oauth2ClientId": "987654321098765432109"}, { "name": "projects/my-project/serviceAccounts/[email protected]", "projectId": "mitt-projekt", "uniqueId"": "234567890123456789012", "email": "[email protected]", "description": "Mitt andra tjänstkonto", "displayName": "Tjänstkonto 2", "etag": "UkQpTwBVUsL "oauth2ClientId": "876543210987654321098"} ] }
 C++
För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. Mer information finns i referensdokumentationen för IAM C++ API

namnutrymme iam = ::google::moln::iam; std::string const&  project_id) { iam::IAMClient client(iam::MakeIAMCconnection int count = 0; for (auto const&  sa : client.ListServiceAccounts("projects/"+ project_id)) { if (!sa) throw std::runtime_error(sa.statusmessage std::cout<<  "Servicekontot har hämtats: "<<  sa->namn()<< ""; ++count; } if (count == 0) { std::cout<<  "Inga tjänstekonton hittades i projektet: "<< project_id<< ""; } }
 C#

För att lära dig hur du installerar och använder klientbiblioteket för IAM, se IAM-klientbibliotek. För mer information, se referensdokumentationen för IAM C# API

använder System; använder System.Collections.Generic; använder Google.Apis.Auth.OAuth2; använder Google.Apis.Iam.v1; använder Google.Apis.Iam.v1.Data; public partial class ServiceAccounts { public static IList ListServiceAccounts(string projectId) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credentialvar response = service.Projects.ServiceAccounts.List( "projects/" + projectId).Execute foreach (ServiceAccount account in response.Accounts) { Console.WriteLine("Name: " + account.Name); Console.WriteLine("Display Name: " + account.DisplayName); Console.WriteLine("Email: " + account.Email); Console.WriteLine } return response.Accounts; } }
 Go
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Go API reference documentation

import ( "context" "fmt" "io" iam "google.golang.org/api/iam/v1" ) // listServiceAccounts lists a project's service accounts. func listServiceAccounts(w io.Writer, projectID string) iam.ServiceAccount, error) { ctx := context.Background() service, err := iam.NewService(ctx) if err != nil { return nil, fmt.Errorf("iam.NewService: %v", err) } response, err := service.Projects.ServiceAccounts.List("projects/" + projectID).Do() if err != nil { return nil, fmt.Errorf("Projects.ServiceAccounts.List: %v", err) } for _, account := range response.Accounts { fmt.Fprintf(w, "Listing service account: %v
", account.Name) } return response.Accounts, nil }
 Java
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Java API reference documentation


import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; import com.google.api.client.json.jackson2.JacksonFactory; import com.google.api.services.iam.v1.Iam; import com.google.api.services.iam.v1.IamScopes; import com.google.api.services.iam.v1.model.ListServiceAccountsResponse; import com.google.api.services.iam.v1.model.ServiceAccount; import com.google.auth.http.HttpCredentialsAdapter; import com.google.auth.oauth2.GoogleCredentials; import java.io.IOException; import java.security.GeneralSecurityException; import java.util.Collections; import java.util.List; public class ListServiceAccounts { // Lists all service accounts for the current project. public static void listServiceAccounts(String projectId) { // String projectId = "my-project-id" Iam service = null; try { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Unable to initialize service: 
" + e.toString return; } try { ListServiceAccountsResponse response = service.projectsserviceAccountslist("projects/" + projectId).execute List serviceAccounts = response.getAccounts for (ServiceAccount account : serviceAccounts) { System.out.println("Name: " + account.getName System.out.println("Display Name: " + account.getDisplayName System.out.println("Email: " + account.getEmail System.out.println } } catch (IOException e) { System.out.println("Unable to list service accounts: 
" + e.toString } } private static Iam initService() throws GeneralSecurityException, IOException { // Use the Application Default Credentials strategy for authentication. For more info, see: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initialize the IAM service, which can be used to send requests to the IAM API. Iam service = new Iam.Builder( GoogleNetHttpTransport.newTrustedTransport JacksonFactory.getDefaultInstance new HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build return service; } }
 Python
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Python API reference documentation

import os from google.oauth2 import service_account import googleapiclient.discovery def list_service_accounts(project_id): Lists all service accounts for the current project credentials = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_APPLICATION_CREDENTIALS scopeshttpswww.googleapis.com/auth/cloud-platform service = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) service_accounts = service.projectsserviceAccountslist( name='projects/' + project_id).execute() for account in service_accounts['accounts print('Name: ' + account['name print('Email: ' + account['email print(' ') return service_accounts
## Updating a service account
The display name (friendly name) and description of a service account are commonly used to capture additional information about the service account, such as the purpose of the service account or a contact person for the account

 Console
In the Google Cloud console, go to the
Service accountspage

Select a project

Click the email address of the service account that you want to rename

Enter the new name in the
Namebox, then click Save

 gcloud CLI
Execute the
gcloud iam service-accounts update
command to update a service account

Command:
gcloud iam service-accounts update SA_NAME@ PROJECT_ID.iam.gserviceaccount.com \ --description=" UPDATED_SA_DESCRIPTION" \ --display-name=" UPDATED_DISPLAY_NAME"
The output is the renamed service account:
description:
UPDATED_SA_DESCRIPTIONdisplayName: UPDATED_DISPLAY_NAMEname: projects/ PROJECT_ID/serviceAccounts/ SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
 REST
The
serviceAccounts.patch
method updates a service account

Before using any of the request data, make the following replacements:
: Your Google Cloud project ID. Project IDs are alphanumeric strings, like
PROJECT_ID
my-project

: The ID of your service account. This can either be the service account's email address in the form
SA_ID
, or the service account's unique numeric ID

SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
: The alphanumeric ID of your service account. This name must be between 6 and 30 characters, and can contain lowercase alphanumeric characters and dashes

SA_NAME
- Replace at least one of the following:
: A new display name for your service account

UPDATED_DISPLAY_NAME
: A new description for your service account

UPDATED_DESCRIPTION
HTTP method and URL:
PATCH httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID
Request JSON body:
{ "serviceAccount": { "email": "
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com", "displayName": " UPDATED_DISPLAY_NAME", "description": " UPDATED_DESCRIPTION" }, "updateMask": "displayName,description" }
To send your request, expand one of these options:
 curl (Linux, macOS, or Cloud Shell)
Save the request body in a file called
request.json,
and execute the following command:
curl -X PATCH -H "Authorization: Bearer $(gcloud auth print-access-token)" -H "Content-Type: application/json; charset=utf-8" -d @request.json "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID"
 PowerShell (Windows)
Save the request body in a file called
request.json,
and execute the following command:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }
Invoke-WebRequest `
-Method PATCH `
-Headers $headers `
-ContentType: "application/json; charset=utf-8" `
-InFile request.json `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID" | Select-Object -Expand Content
 API Explorer (browser)
Copy the request body and open the
method reference page

The API Explorer panel opens on the right side of the page

You can interact with this tool to send requests


Paste the request body in this tool, complete any other required fields, and click
**Execute**

You should receive a JSON response similar to the following:
{ "name": "projects/my-project/serviceAccounts/[email protected]", "displayName": "My updated service account", "description": "An updated description of my service account" }
 C++
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C++ API reference documentation

namespace iam = ::google::cloud::iam; std::string const& name, std::string const& display_name) { iam::IAMClient client(iam::MakeIAMConnection google::iam::admin::v1::PatchServiceAccountRequest request; google::iam::admin::v1::ServiceAccount service_account; service_account.set_name(name); service_account.set_display_name(display_name); google::protobuf::FieldMask update_mask; *update_mask.add_paths() = "display_name"; *request.mutable_service_account() = service_account; *request.mutable_update_mask() = update_mask; auto response = client.PatchServiceAccount(request); if (!response) throw std::runtime_error(response.statusmessage std::cout << "ServiceAccount successfully updated: " << response->DebugString() << "
"; }
 C#
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C# API reference documentation

using System; using Google.Apis.Auth.OAuth2; using Google.Apis.Iam.v1; using Google.Apis.Iam.v1.Data; public partial class ServiceAccounts { public static ServiceAccount RenameServiceAccount(string email, string newDisplayName) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credential// First, get a ServiceAccount using List() or Get string resource = "projectsserviceAccounts/" + email; var serviceAccount = service.Projects.ServiceAccounts.Get(resource) .Execute // Then you can update the display name. serviceAccount.DisplayName = newDisplayName; serviceAccount = service.Projects.ServiceAccounts.Update( serviceAccount, resource).Execute Console.WriteLineUpdated display name for {serviceAccount.Email} " + "to: " + serviceAccount.DisplayName); return serviceAccount; } }
 Go
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Go API reference documentation


import ( "context" "fmt" "io" iam "google.golang.org/api/iam/v1" ) // renameServiceAccount renames a service account. func renameServiceAccount(w io.Writer, email, newDisplayName string) (*iam.ServiceAccount, error) { ctx := context.Background() service, err := iam.NewService(ctx) if err != nil { return nil, fmt.Errorf("iam.NewService: %v", err) } // First, get a ServiceAccount using List() or Get resource := "projectsserviceAccounts/" + email serviceAccount, err := service.Projects.ServiceAccounts.Get(resource).Do() if err != nil { return nil, fmt.Errorf("Projects.ServiceAccounts.Get: %v", err) } // Then you can update the display name. serviceAccount.DisplayName = newDisplayName serviceAccount, err = service.Projects.ServiceAccounts.Update(resource, serviceAccount).Do() if err != nil { return nil, fmt.Errorf("Projects.ServiceAccounts.Update: %v", err) } fmt.Fprintf(w, "Updated service account: %v", serviceAccount.Email) return serviceAccount, nil }
 Java
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Java API reference documentation

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; import com.google.api.client.json.jackson2.JacksonFactory; import com.google.api.services.iam.v1.Iam; import com.google.api.services.iam.v1.IamScopes; import com.google.api.services.iam.v1.model.ServiceAccount; import com.google.auth.http.HttpCredentialsAdapter; import com.google.auth.oauth2.GoogleCredentials; import java.io.IOException; import java.security.GeneralSecurityException; import java.util.Collections; public class RenameServiceAccount { // Changes a service account's display name. public static void renameServiceAccount(String projectId, String serviceAccountName) { // String projectId = "my-project-id"; // String serviceAccountName = "my-service-account-name"; Iam service = null; try { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Unable to initialize service: 
" + e.toString return; } String serviceAccountEmail = serviceAccountName ++ projectId + ".iam.gserviceaccount.com"; try { // First, get a service account using List() or Get() ServiceAccount serviceAccount = service .projects() .serviceAccounts() .get("projectsserviceAccounts/" + serviceAccountEmail) .execute // Then you can update the display name serviceAccount.setDisplayName("your-new-display-name serviceAccount = service .projects() .serviceAccounts() .update(serviceAccount.getName serviceAccount) .execute System.out.println( "Updated display name for " + serviceAccount.getName() + " to: " + serviceAccount.getDisplayName } catch (IOException e) { System.out.println("Unable to rename service account: 
" + e.toString } } private static Iam initService() throws GeneralSecurityException, IOException { // Use the Application Default Credentials strategy for authentication. For more info, see: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initialize the IAM service, which can be used to send requests to the IAM API. Iam service = new Iam.Builder( GoogleNetHttpTransport.newTrustedTransport JacksonFactory.getDefaultInstance new HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build return service; } }
 Python

To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Python API reference documentation

import os from google.oauth2 import service_account import googleapiclient.discovery def rename_service_account(email, new_display_name): Changes a service account's display name # First, get a service account using List() or Get() credentials = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_APPLICATION_CREDENTIALS scopeshttpswww.googleapis.com/auth/cloud-platform service = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) resource = 'projectsserviceAccounts/' + email my_service_account = service.projectsserviceAccountsget( name=resource).execute() # Then you can update the display name my_service_account['displayName'] = new_display_name my_service_account = service.projectsserviceAccountsupdate( name=resource, body=my_service_account).execute() print('Updated display name for {} to: format( my_service_account['email my_service_account['displayName return my_service_account
## Disabling a service account
Similar to deleting a service account, when you disable a service account, applications will no longer have access to Google Cloud resources through that service account. If you disable the default App Engine and Compute Engine service accounts, the instances will no longer have access to resources in the project. If you attempt to disable an already disabled service account, it will have no effect

Unlike deleting a service account, disabled service accounts can easily be re-enabled as necessary. We recommend disabling a service account before deleting it to make sure no critical applications are using the service account

 Console
In the Google Cloud console, go to the
Service accountspage

Select a project

Click the name of the service account that you want to disable

Under
Service account status, click Disable service account, then click Disableto confirm the change

 gcloud CLI
Execute the
gcloud iam service-accounts disable
command to disable a service account

Command:
gcloud iam service-accounts disable
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
Output:
Disabled service account
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
 REST
The
serviceAccounts.disable
method immediately disables a service account

Before using any of the request data, make the following replacements:
: Your Google Cloud project ID. Project IDs are alphanumeric strings, like
PROJECT_ID
my-project

: The ID of your service account. This can either be the service account's email address in the form
SA_ID
, or the service account's unique numeric ID

SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
HTTP method and URL:
POST httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:disable
To send your request, expand one of these options:
 curl (Linux, macOS, or Cloud Shell)
Execute the following command:
curl -X POST -H "Authorization: Bearer $(gcloud auth print-access-token)" -H "Content-Type: application/json; charset=utf-8" -d "" "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:disable"
 PowerShell (Windows)
Execute the following command:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }
Invoke-WebRequest `
-Method POST `
-Headers $headers `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:disable" | Select-Object -Expand Content
 API Explorer (browser)
Open the
method reference page

The API Explorer panel opens on the right side of the page

You can interact with this tool to send requests

Complete any required fields and click
**Execute**

If successful, the response body will be empty

 C++
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C++ API reference documentation

namespace iam = ::google::cloud::iam; std::string const& name) { iam::IAMClient client(iam::MakeIAMConnection google::iam::admin::v1::DisableServiceAccountRequest request; request.set_name(name); auto response = client.DisableServiceAccount(request); if (!response.ok throw std::runtime_error(response.message std::cout << "ServiceAccount successfully disabled.
"; }
 C#
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C# API reference documentation

using System; using Google.Apis.Auth.OAuth2; using Google.Apis.Iam.v1; using Google.Apis.Iam.v1.Data; public partial class ServiceAccounts { public static void DisableServiceAccount(string email) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credentialvar request = new DisableServiceAccountRequest string resource = "projectsserviceAccounts/" + email; service.Projects.ServiceAccounts.Disable(request, resource).Execute Console.WriteLine("Disabled service account: " + email); } }
 Go
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Go API reference documentation


import ( "context" "fmt" "io" iam "google.golang.org/api/iam/v1" ) // disableServiceAccount disables a service account. func disableServiceAccount(w io.Writer, email string) error { // email:= [email protected] ctx := context.Background() service, err := iam.NewService(ctx) if err != nil { return fmt.Errorf("iam.NewService: %v", err) } request := &iam.DisableServiceAccountRequest{} _, err = service.Projects.ServiceAccounts.Disable("projectsserviceAccountsemail, request).Do() if err != nil { return fmt.Errorf("Projects.ServiceAccounts.Disable: %v", err) } fmt.Fprintf(w, "Disabled service account: %v", email) return nil }
 Java
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Java API reference documentation

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; import com.google.api.client.json.jackson2.JacksonFactory; import com.google.api.services.iam.v1.Iam; import com.google.api.services.iam.v1.IamScopes; import com.google.api.services.iam.v1.model.DisableServiceAccountRequest; import com.google.auth.http.HttpCredentialsAdapter; import com.google.auth.oauth2.GoogleCredentials; import java.io.IOException; import java.security.GeneralSecurityException; import java.util.Collections; public class DisableServiceAccount { // Disables a service account. public static void disableServiceAccount(String projectId, String serviceAccountName) { // String projectId = "my-project-id"; // String serviceAccountName = "my-service-account-name"; Iam service = null; try { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Unable to initialize service: 
" + e.toString return; } String serviceAccountEmail = serviceAccountName ++ projectId + ".iam.gserviceaccount.com"; try { DisableServiceAccountRequest request = new DisableServiceAccountRequest service .projects() .serviceAccounts() .disable("projectsserviceAccounts/" + serviceAccountEmail, request) .execute System.out.println("Disabled service account: " + serviceAccountEmail); } catch (IOException e) { System.out.println("Unable to disable service account: 
" + e.toString } } private static Iam initService() throws GeneralSecurityException, IOException { // Use the Application Default Credentials strategy for authentication. For more info, see: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initialize the IAM service, which can be used to send requests to the IAM API. Iam service = new Iam.Builder( GoogleNetHttpTransport.newTrustedTransport JacksonFactory.getDefaultInstance new HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build return service; } }
 Python
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Python API reference documentation


import os from google.oauth2 import service_account import googleapiclient.discovery def disable_service_account(email): Disables a service account credentials = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_APPLICATION_CREDENTIALS scopeshttpswww.googleapis.com/auth/cloud-platform service = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) service.projectsserviceAccountsdisable( name='projectsserviceAccounts/' + email).execute() print("Disabled service account :" + email)
## Enabling a service account
After enabling a disabled service account, applications will regain access to Google Cloud resources through that service account

You can enable a disabled service account whenever you need to. If you attempt to enable an already enabled service account, it will have no effect

 Console
In the Google Cloud console, go to the
Service accountspage

Select a project

Click the name of the service account that you want to enable

Under
Service account status, click Enable service account, then click Enableto confirm the change

 gcloud CLI
Execute the
gcloud iam service-accounts enable
command to enable a service account

Command:
gcloud iam service-accounts enable
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
Output:
Enabled service account
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
 REST
The
serviceAccounts.enable
method enables a previously disabled service account

Before using any of the request data, make the following replacements:
: Your Google Cloud project ID. Project IDs are alphanumeric strings, like
PROJECT_ID
my-project

: The ID of your service account. This can either be the service account's email address in the form
SA_ID
, or the service account's unique numeric ID

SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
HTTP method and URL:
POST httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:enable
To send your request, expand one of these options:
 curl (Linux, macOS, or Cloud Shell)
Execute the following command:
curl -X POST -H "Authorization: Bearer $(gcloud auth print-access-token)" -H "Content-Type: application/json; charset=utf-8" -d "" "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:enable"
 PowerShell (Windows)
Execute the following command:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }
Invoke-WebRequest `
-Method POST `
-Headers $headers `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID:enable" | Select-Object -Expand Content
 API Explorer (browser)
Open the
method reference page

The API Explorer panel opens on the right side of the page

You can interact with this tool to send requests

Complete any required fields and click
**Execute**

If successful, the response body will be empty

 C++
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C++ API reference documentation


namespace iam = ::google::cloud::iam; std::string const& name) { iam::IAMClient client(iam::MakeIAMConnection google::iam::admin::v1::EnableServiceAccountRequest request; request.set_name(name); auto response = client.EnableServiceAccount(request); if (!response.ok throw std::runtime_error(response.message std::cout << "ServiceAccount successfully enabled.
"; }
 C#
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C# API reference documentation

using System; using Google.Apis.Auth.OAuth2; using Google.Apis.Iam.v1; using Google.Apis.Iam.v1.Data; public partial class ServiceAccounts { public static void EnableServiceAccount(string email) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credentialvar request = new EnableServiceAccountRequest string resource = "projectsserviceAccounts/" + email; service.Projects.ServiceAccounts.Enable(request, resource).Execute Console.WriteLine("Enabled service account: " + email); } }
 Go
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Go API reference documentation

import ( "context" "fmt" "io" iam "google.golang.org/api/iam/v1" ) // enableServiceAccount enables a service account. func enableServiceAccount(w io.Writer, email string) error { // email:= [email protected] ctx := context.Background() service, err := iam.NewService(ctx) if err != nil { return fmt.Errorf("iam.NewService: %v", err) } request := &iam.EnableServiceAccountRequest{} _, err = service.Projects.ServiceAccounts.Enable("projectsserviceAccountsemail, request).Do() if err != nil { return fmt.Errorf("Projects.ServiceAccounts.Enable: %v", err) } fmt.Fprintf(w, "Enabled service account: %v", email) return nil }
 Java
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Java API reference documentation

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; import com.google.api.client.json.jackson2.JacksonFactory; import com.google.api.services.iam.v1.Iam; import com.google.api.services.iam.v1.IamScopes; import com.google.api.services.iam.v1.model.EnableServiceAccountRequest; import com.google.auth.http.HttpCredentialsAdapter; import com.google.auth.oauth2.GoogleCredentials; import java.io.IOException; import java.security.GeneralSecurityException; import java.util.Collections; public class EnableServiceAccount { // Enables a service account. public static void enableServiceAccount(String projectId, String serviceAccountName) { // String projectId = "my-project-id"; // String serviceAccountName = "my-service-account-name"; Iam service = null; try { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Unable to initialize service: 
" + e.toString return; } String serviceAccountEmail = serviceAccountName ++ projectId + ".iam.gserviceaccount.com"; try { EnableServiceAccountRequest request = new EnableServiceAccountRequest service .projects() .serviceAccounts() .enable("projectsserviceAccounts/" + serviceAccountEmail, request) .execute System.out.println("Enabled service account: " + serviceAccountEmail); } catch (IOException e) { System.out.println("Unable to enable service account: 
" + e.toString } } private static Iam initService() throws GeneralSecurityException, IOException { // Use the Application Default Credentials strategy for authentication. For more info, see: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initialize the IAM service, which can be used to send requests to the IAM API. Iam service = new Iam.Builder( GoogleNetHttpTransport.newTrustedTransport JacksonFactory.getDefaultInstance new HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build return service; } }
 Python
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Python API reference documentation

import os from google.oauth2 import service_account import googleapiclient.discovery def enable_service_account(email): Enables a service account credentials = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_APPLICATION_CREDENTIALS scopeshttpswww.googleapis.com/auth/cloud-platform service = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) service.projectsserviceAccountsenable( name='projectsserviceAccounts/' + email).execute() print("Enabled service account :" + email)
## Deleting a service account
When you delete a service account, applications will no longer have access to Google Cloud resources through that service account. If you delete the default App Engine and Compute Engine service accounts, the instances will no longer have access to resources in the project

Delete with caution; make sure your critical applications are no longer using a service account before deleting it. If you're not sure whether a service account is being used, we recommend disabling the service account before deleting it. Disabled service accounts can be easily re-enabled if they are still in use

If you delete a service account, then create a new service account with the same name, the new service account is treated as a separate identity; it does not inherit the roles granted to the deleted service account. In contrast, when you delete a service account, then undelete it, the service account's identity does not change, and the service account retains its roles

When a service account is deleted, its role bindings are not immediately

removed; they are automatically purged from the system after a maximum of 60
days. Until that time, the service account appears in role bindings with a
deleted: prefix and a
?uid= suffix, where
`NUMERIC_ID`
is a unique numeric ID for the service
account

`NUMERIC_ID`
Deleted service accounts do not count towards your service account quota

 Console
In the Google Cloud console, go to the
Service accountspage

Select a project

Select the service account you want to delete, and then click
Delete

 gcloud CLI
Execute the
gcloud iam service-accounts delete
command to delete a service account

Command:
gcloud iam service-accounts delete SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
Output:
Deleted service account
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
 REST
The
serviceAccounts.delete
method deletes a service account

Before using any of the request data, make the following replacements:
: Your Google Cloud project ID. Project IDs are alphanumeric strings, like
PROJECT_ID
my-project

: The ID of your service account. This can either be the service account's email address in the form
SA_ID
, or the service account's unique numeric ID

SA_NAME@ PROJECT_ID.iam.gserviceaccount.com
HTTP method and URL:
DELETE httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID
To send your request, expand one of these options:
 curl (Linux, macOS, or Cloud Shell)
Execute the following command:
curl -X DELETE -H "Authorization: Bearer $(gcloud auth print-access-token)" "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID"
 PowerShell (Windows)
Execute the following command:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }
Invoke-WebRequest `
-Method DELETE `
-Headers $headers `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_ID" | Select-Object -Expand Content
 API Explorer (browser)
Open the
method reference page

The API Explorer panel opens on the right side of the page

You can interact with this tool to send requests

Complete any required fields and click
**Execute**

If successful, the response body will be empty

 C++
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C++ API reference documentation

namespace iam = ::google::cloud::iam; std::string const& name) { iam::IAMClient client(iam::MakeIAMConnection auto response = client.DeleteServiceAccount(name); if (!response.ok throw std::runtime_error(response.message std::cout << "ServiceAccount successfully deleted.
"; }
 C#

To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM C# API reference documentation

using System; using Google.Apis.Auth.OAuth2; using Google.Apis.Iam.v1; public partial class ServiceAccounts { public static void DeleteServiceAccount(string email) { var credential = GoogleCredential.GetApplicationDefault() .CreateScoped(IamService.Scope.CloudPlatform); var service = new IamService(new IamService.Initializer { HttpClientInitializer = credentialstring resource = "projectsserviceAccounts/" + email; service.Projects.ServiceAccounts.Delete(resource).Execute Console.WriteLine("Deleted service account: " + email); } }
 Go
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Go API reference documentation

import ( "context" "fmt" "io" iam "google.golang.org/api/iam/v1" ) // deleteServiceAccount deletes a service account. func deleteServiceAccount(w io.Writer, email string) error { ctx := context.Background() service, err := iam.NewService(ctx) if err != nil { return fmt.Errorf("iam.NewService: %v", err) } _, err = service.Projects.ServiceAccounts.Delete("projectsserviceAccounts/" + email).Do() if err != nil { return fmt.Errorf("Projects.ServiceAccounts.Delete: %v", err) } fmt.Fprintf(w, "Deleted service account: %v", email) return nil }
 Java
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Java API reference documentation

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport; import com.google.api.client.json.jackson2.JacksonFactory; import com.google.api.services.iam.v1.Iam; import com.google.api.services.iam.v1.IamScopes; import com.google.auth.http.HttpCredentialsAdapter; import com.google.auth.oauth2.GoogleCredentials; import java.io.IOException; import java.security.GeneralSecurityException; import java.util.Collections; public class DeleteServiceAccount { // Deletes a service account. public static void deleteServiceAccount(String projectId, String serviceAccountName) { // String projectId = "my-project-id"; // String serviceAccountName = "my-service-account-name"; Iam service = null; try { service = initService } catch (IOException | GeneralSecurityException e) { System.out.println("Unable to initialize service: 

" + e.toString return; } String serviceAccountEmail = serviceAccountName ++ projectId + ".iam.gserviceaccount.com"; try { service .projects() .serviceAccounts() .delete("projectsserviceAccounts/" + serviceAccountEmail) .execute System.out.println("Deleted service account: " + serviceAccountEmail); } catch (IOException e) { System.out.println("Unable to delete service account: 
" + e.toString } } private static Iam initService() throws GeneralSecurityException, IOException { // Use the Application Default Credentials strategy for authentication. For more info, see: // httpscloud.google.com/docs/authentication/production#finding_credentials_automatically GoogleCredentials credential = GoogleCredentials.getApplicationDefault() .createScoped(Collections.singleton(IamScopes.CLOUD_PLATFORM // Initialize the IAM service, which can be used to send requests to the IAM API. Iam service = new Iam.Builder( GoogleNetHttpTransport.newTrustedTransport JacksonFactory.getDefaultInstance new HttpCredentialsAdapter(credential)) .setApplicationName("service-accounts") .build return service; } }
 Python
To learn how to install and use the client library for IAM, see IAM client libraries. For more information, see the IAM Python API reference documentation

import os from google.oauth2 import service_account import googleapiclient.discovery def delete_service_account(email): Deletes a service account credentials = service_account.Credentials.from_service_account_file( filename=os.environ['GOOGLE_APPLICATION_CREDENTIALS scopeshttpswww.googleapis.com/auth/cloud-platform service = googleapiclient.discovery.build( 'iam', 'v1', credentials=credentials) service.projectsserviceAccountsdelete( name='projectsserviceAccounts/' + email).execute() print('Deleted service account: ' + email)
## Undeleting a service account
In some cases, you can use the
undelete command to undelete a deleted service
account. You can usually undelete a deleted service account if it meets these
criteria:
The service account was deleted less than 30 days ago

After 30 days, IAM permanently removes the service account. Google Cloud cannot recover the service account after it is permanently removed, even if you file a support request

There is no existing service account with the same name as the deleted service account

For example, suppose that you accidentally delete the service account
[email protected]. You still need a service account with that name, so you create a new service account with the same name,
[email protected]

The new service account does not inherit the permissions of the deleted service account. In effect, it is completely separate from the deleted service account. However, you cannot undelete the original service account, because the new service account has the same name

To address this issue, delete the new service account, then try to undelete the original service account

If you are not able to undelete the service account, you can create a new service account with the same name; revoke all of the roles from the deleted service account; and grant the same roles to the new service account. For details, see Policies with deleted principals

 Finding a deleted service account's numeric ID
When you undelete a service account, you must provide its numeric ID. The
numeric ID is a 21-digit number, such as
123456789012345678901, that uniquely
identifies the service account. For example, if you delete a service account,
then create a new service account with the same name, the original service
account and the new service account will have different numeric IDs

If you know that a binding in an allow policy includes the deleted service
account, you can get the allow policy, then find the numeric ID
in the allow policy. The numeric ID is appended to the name of the deleted
service account. For example, in this allow policy, the numeric ID for the
deleted service account is
123456789012345678901:
{ "version": 1, "etag": "BwUjMhCsNvY "bindings": [ { "members": [
"deleted:serviceAccount:[email protected]?uid=123456789012345678901 "role": "roles/iam.serviceAccountUser" }, ] }
Numeric IDs are only appended to the names of deleted principals

Alternatively, you can search your audit logs for the
DeleteServiceAccount
operation that deleted the service account:
In the Google Cloud console, go to the
Logs explorerpage

In the query editor, enter the following query, replacing
with the email address of your service account (for example,
SERVICE_ACCOUNT_EMAIL
[email protected]):
resource.type="service_account" resource.labels.email_id="
SERVICE_ACCOUNT_EMAIL" "DeleteServiceAccount"
If the service account was deleted more than an hour ago, click
Last 1 hour, select a longer period of time from the drop-down list, then click Apply

Click
Run query. The Logs Explorer displays the
DeleteServiceAccountoperations that affected service accounts with the name you specified

Find and note the numeric ID of the deleted service account by doing one of the following:
If the search results include only one
DeleteServiceAccountoperation, find the numeric ID in the
Unique IDfield of the Log fieldspane

If the search results show more than one log, do the following:

Find the correct log entry. To find the correct log entry, click theexpander arrow next to a log entry. Review the details of the log entry and determine whether the log entry shows the operation that you want to undo. Repeat this process until you find the correct log entry

In the correct log entry, locate the service account's numeric ID. To locate the numeric ID, expand the log entry's
protoPayloadfield, then find the
resourceNamefield

The numeric ID is everything after
serviceAccountsin the
resourceNamefield

-
-
 Undeleting the service account by numeric ID
After you find the numeric ID for the deleted service account, you can try to undelete the service account

 gcloud CLI
Execute the
gcloud beta iam service-accounts undelete
command to undelete a service account

Command:
gcloud beta iam service-accounts undelete
ACCOUNT_ID
Output:
restoredAccount: email:
SA_NAME@ PROJECT_ID.iam.gserviceaccount.com etag: BwWWE7zpApg= name: projects/ PROJECT_ID/serviceAccounts/ SA_NAME@ PROJECT_ID.iam.gserviceaccount.com oauth2ClientId: '123456789012345678901' projectId: PROJECT_IDuniqueId: ' ACCOUNT_ID'
 REST
The
serviceAccounts.undelete
method restores a deleted service account

Before using any of the request data, make the following replacements:
: Your Google Cloud project ID. Project IDs are alphanumeric strings, like
PROJECT_ID
my-project

: The unique numeric ID of the service account

SA_NUMERIC_ID
HTTP method and URL:
POST httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_NUMERIC_ID:undelete
To send your request, expand one of these options:
 curl (Linux, macOS, or Cloud Shell)
Execute the following command:
curl -X POST -H "Authorization: Bearer $(gcloud auth print-access-token)" -H "Content-Type: application/json; charset=utf-8" -d "" "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_NUMERIC_ID:undelete"
 PowerShell (Windows)
Execute the following command:
$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred" }
Invoke-WebRequest `
-Method POST `
-Headers $headers `
-Uri "httpsiam.googleapis.com/v1/projects/
PROJECT_ID/serviceAccounts/ SA_NUMERIC_ID:undelete" | Select-Object -Expand Content
 API Explorer (browser)
Open the
method reference page

The API Explorer panel opens on the right side of the page

You can interact with this tool to send requests

Complete any required fields and click
**Execute**

If the account can be undeleted, you receive a
200 OK response
code with details about the restored service account, like the following:

{ "restoredAccount": { "name": "projects/my-project/serviceAccounts/[email protected]", "projectId": "my-project", "uniqueId": "123456789012345678901", "email": "[email protected]", "displayName": "My service account", "etag": "BwUp3rVlzes "description": "A service account for running jobs in my project", "oauth2ClientId": "987654321098765432109" } }
## What's next
- Learn how to create and manage service account keys

- Review the process for granting IAM roles to all types of principals, including service accounts

- Explore how you can use role recommendations to downscope permissions for all principals, including service accounts

- Understand how to allow principals to impersonate service accounts

## Try it for yourself
If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.Get started for free