= Openstack OVH Adanmış Sunucu Ağı =

![ ](httpswww.redditstatic.com/desktop2x/img/renderTimingPixel.png)

Herkese merhaba, OVH'den özel bir sunucu ve /27 alt ağ sipariş ettim.

Üzerine Openstack'i (en önemli bileşenlerle birlikte) kurdum.

/27 alt ağını sunucuya bağladım ve ayrıca "eno1"arabirimine atanan 5.5.5.128'e ping atabiliyorum. (5.5.5. yalnızca bir yer tutucudur)

Sorun şu ki, bir yol muhtemelen yanlış olduğu için diğer tüm IP adreslerine ulaşılamıyor.

Sunucumun rota tablosu bu:

root@controller yolu Çekirdek IP yönlendirme tablosu Hedef Ağ Geçidi Genmask Bayraklar Metrik Ref Iface Kullan varsayılan ovh-gateway-ip 0.0.0.0 UG 10brqf535e9d2-5d sunucu-ana-ip 0.0.0.0 255.255.255.0 U brqf535e9d2-5d 5.5.5.128 0.0.0.0 255.255.255.224 U brqf535e9d2-5d 192.168.122.0 0.0.0.0 255.255.255.0 U virbr0

Sunucuların ana IP'si için /24 alt ağ maskesi doğrudur. Neden bir /32 olmadığını bilmiyorum

Ne yazık ki, VM'leri yerleştirmek istediğim ağa giden yol çalışmıyor. İçinde herhangi bir IP'ye ulaşamıyorum. Ne dışarıdan ne de kontrolörün kendisinden.

"5.5.5.128/27"için ağ geçidi IP'sini OVH ağ geçidi IP'sine (varsayılan rota için kullanıyorum), Sunucuların ana IP'sine ve ayrıca 5.5.5.128'e ayarlamayı denedim, ancak hiçbir şey çalışmıyor.

Aranızda aynı sorunu yaşayan veya çözümünü bilen var mı?

Yardımın için teşekkürler!

Düzenleme: ifconfig çıktım:


root@controller ifconfig brq70238470-59: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1450 ether 96:76:bc:b7:29:b5 txqueuelen 1000 (Ethernet) RX packets 103 bytes 4852 (4.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 brqf535e9d2-5d: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet main-ip netmask 255.255.255.0 broadcast xxx inet6 main-ipv6 prefixlen 56 scopeid 0x0 inet6 xx prefixlen 64 scopeid 0x20 ethertxqueuelen 1000 (Ethernet) RX packets 83655 bytes 3800864 (3.8 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 129123 bytes 8067301 (8.0 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eno1: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 xx prefixlen 64 scopeid 0x20 ether d0:50:99:da:39:ac txqueuelen 1000 (Ethernet) RX packets 85212 bytes 5905226 (5.9 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 131955 bytes 8233407 (8.2 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 499119 bytes 146251170 (146.2 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 499119 bytes 146251170 (146.2 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 tap3166097e-73: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1450 ether 96:76:bc:b7:29:b5 txqueuelen 1000 (Ethernet) RX packets 12 bytes 2284 (2.2 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 102 bytes 6116 (6.1 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 tap4b8dc5a7-f5: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1500 ethertxqueuelen 1000 (Ethernet) RX packets 7 bytes 702 (702.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 91823 bytes 4385443 (4.3 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 tapc2ba003a-21: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1450 inet6 fe80::fc16:3eff:fe03:28a3 prefixlen 64 scopeid 0x20 ether fe:16:3e:03:28:a3 txqueuelen 1000 (Ethernet) RX packets 102 bytes 6116 (6.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 15 bytes 2378 (2.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099,BROADCAST,MULTICAST> mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:de:85:70 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vxlan-53: flags=4163,BROADCAST,RUNNING,MULTICAST> mtu 1450 ether ea:e4:58:8e:bc:d8 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 103 overruns 0 carrier 0 collisions 0

Its a bit strange, ifconfig doesnt show me my 5.5.5.128/27 here.

# ip a12: brqf535e9d2-5d: ,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/etherbrd ff:ff:ff:ff:ff:ff inet main-ip/24 brd xxx.255 scope global brqf535e9d2-5d valid_lft forever preferred_lft forever inet 5.5.5.128/27 brd 5.5.5.159 scope global brqf535e9d2-5d valid_lft forever preferred_lft forever inet6 xxx/56 scope global valid_lft forever preferred_lft forever inet6 xxx/64 scope link valid_lft forever preferred_lft forever 

![ ](httpswww.redditstatic.com/desktop2x/img/renderTimingPixel.png)

Hi, Try to list all the interfaces and taps connected to the bridge brqf535e9d2-5d with the command "brctl show".

You can see wich network namespace is connected to the tap interface doing "ip a" under link netns.

Then try to stablish communication in the subnet from the network namespace. "ip netns exec [netns connected to the tap] ip a"

This way you can see if you can stablish connection to instances running in compute nodes in the subnet 5.5.5.128/27

Hi, thanks for your reply.

The brctl show returns me this:

root@controller brctl show

bridge name bridge id STP enabled interfaces

brq70238470-59 8000.1ed5e9a9e7c0 no tap2a631157-e2

tap3166097e-73

tapc2ba003a-21

tapeefe5e6c-2d

vxlan-53

brqf535e9d2-5d 8000.b65368642388 no eno1

tap4b8dc5a7-f5

tapa2486984-d4

virbr0 8000.525400de8570 yes

Could you explain how and where I can find the "network namespace"

You can see wich network namespace is connected to the tap interface doing "ip a" under link netns.

I can't find it

.128 looks like a network address. you should use 129-158 for host and one ip should be the gw

== About Community ==

Members

Online